Removal Procedure
- Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
- Loosen the A/C refrigerant filter nuts.
- Remove the A/C refirgerant filter.
Important: The nuts and the ferrules will remain on the line. Do not try to remove.
Installation Procedure
- Lubricate the O-rings with clean 525 viscosity refrigerant oil and install them onto the evaperator tube.
- Install the A/C refrigerant filter with the arrow pointing toward the evaporator.
- Ensure that the liquid line is bottomed out in the filter.
- Evacuate and recharge the A/C system.
- Leak test the fittings of the componet. Using theJ 39400-A
- Lower the vehicle.
Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
Tighten
Tighten the filter nuts to 15 N·m (11 lb ft).
