Tools Required
• | J 42137 Cam
Orientation Plate Adapter |
- Install the inner race (5).
- Install the upper bearing inner race seat (4).
- Install the upper bearing spring (3).
- Lubricate the turn signal cancel cam assembly (2) with
lithium grease.
- Install the turn signal cancel cam assembly (2).
- Install the shaft lock (1).
- Install the new bearing
retainer using J 23653-SIR
and J 42137
.
Caution: Improper routing of the wire harness assembly may damage the inflatable
restraint steering wheel module coil. This may result in a malfunction of
the coil, which may cause personal injury.
- Install the inflatable restraint steering wheel module
coil. Refer to
Inflatable Restraint Steering Wheel Module Coil Assemble - Off Vehicle
.
- Enable the inflatable restraint steering wheel module. Refer to
Enabling the SIR System
in SIR.