GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2001 🢒 Sunfire 🢒 Steering 🢒 Power Steering System 🢒 Power Steering Pump Pulley Replacement

Tools Required

    • J 25034-C Power Steering Pulley Remover
    • J 25033-C Power Steering Pump Pulley Installer

Removal Procedure
  1. Remove the drive belt from the power steering pump. Refer to Drive Belt Replacement in Engine Mechanical-2.2L.
  2. Remove the power steering pump from the engine. Refer to Power Steering Pump Replacement .

    3. Object Number: 649303 Size: SH
  3. Remove the pulley from the power steering pump using the J 25034-C .

Installation Procedure

    Object Number: 643361 Size: SH
  1. Install the pulley to the power steering pump using the J 25033-C .

    2. Ensure that the face of the pulley is flush with the pump drive shaft.

  2. Install the power steering pump to the engine. Refer to Power Steering Pump Replacement .
  3. Install the drive belt on the power steering pump. Refer to Drive Belt Replacement in Engine Mechanical-2.2L.
  4. Fill the power steering pump with power steering fluid. Refer to Checking and Adding Power Steering Fluid .
  5. Bleed the power steering system. Refer to Power Steering System Bleeding .