All door hardware production attaching screws contain an
epoxy thread-locking compound in order to maintain the minimum original torque
setting. Service attaching screws may not contain a thread-locking compound.
Apply GM P/N 12345493 (or equivalent) to the hardware attachment as
a liquid in order to treat the threads of fasteners for the following reasons:
| • | In order to prevent loosening of service screws |
| • | In order to renew the thread-locking characteristics of production
screws |
After you install and tighten the screws, the adhesive cures. The curing
process is necessary for the following reasons:
| • | In order to bond the attachment to the screw |
| • | In order to prevent loosening of the screw |
| • | In order to prevent backing out of the screw |
The adhesive bond does not prevent future attachment removal if required.
You may use LOCTITE™ 272 (or equivalent) on any thread fastener.
