For 1990-2009 cars only
Removal Procedure
- From the rear of the dome lamp lens, insert a flat bladed tool (1) between the dome lamp lens and the headining trim finish panel (2).
- Use the flat bladed tool in order to push the tab at the rear of the dome lamp lens forward. Disengage the tab from the headlining trim finish panel.
- Pull the dome lamp lens rearward in order to disengage the 2 tabs at the front of the dome lamp lens.
- Pull the bulb rearward to remove it from the socket.
Installation Procedure
- Push the bulb forward to install it to the socket.
- Insert the 2 forward tabs on the dome lamp lens into the appropriate holes in the headlining trim finish panel (2).
- Push at the rear of the dome lamp lens until the rear tab is fully seated in the headlining trim finish panel.
