- Connect the passenger
yellow 2-way connector located near the base of the steering column.
- Install the connector
position assurance (CPA) to the passenger yellow 2-way connector.
- Connect the driver yellow
2-way connector located at the base of the steering column.
- Install the connector
position assurance (CPA) to the driver yellow 2-way connector.
- Install the IP insulator panel. Refer to
Instrument Panel Insulator Replacement
in Instrument Panel,
Gauges and Console.
- Install the SIR Fuse in
the fuse block.
- Staying well away from both air bags, turn ON the ignition.
7.1. | The AIR BAG warning lamp will flash seven times. |
7.2. | The AIR BAG warning lamp will then turn OFF. |
- Perform
Diagnostic System Check - SIR
if the AIR BAG warning lamp does not operate as described.