GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 621603  Size: SH
  1. Disconnect the clutch actuator cylinder line.
  2. Remove the transmission. Refer to Transmission Replacement in Manual Transmission - M86/M94 Getrag.

  3. Object Number: 621539  Size: SH
  4. Remove the clutch actuator cylinder bolts from the transmission.

  5. Object Number: 621542  Size: SH
  6. Remove the following components from the transmission:
  7. • The upper bolt
    • The clutch actuator cylinder

Installation Procedure

  1. Lubricate the inside diameter of the bearing with GM P/N 12345777, or equivalent.
  2. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 621539  Size: SH
  3. Install the following components to the transmission:
  4. • The clutch actuator cylinder
    • The bolts

    Tighten
    Tighten the bolts to 10 N·m (89 lb in).


    Object Number: 621542  Size: SH
  5. Install the upper line release bolt.
  6. Install the transmission. Refer to Transmission Replacement in Manual Transmission - M86/M94 Getrag.

  7. Object Number: 621603  Size: SH
  8. Connect the clutch actuator cylinder line.
  9. Bleed the hydraulic system. Refer to Hydraulic Clutch Bleeding .