GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the right front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  3. Remove the engine mount strut. Refer to Engine Mount Strut Replacement .

  4. Object Number: 60247  Size: SH
  5. Remove the engine mount strut bracket bolts.
  6. Remove the engine mount strut bracket.

Installation Procedure


    Object Number: 60247  Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  1. Install the engine mount strut bracket and the bolts.
  2. Tighten
    Tighten the engine mount strut bracket bolts to 66 N·m (49 lb ft).

  3. Install the engine mount strut. Refer to Engine Mount Strut Replacement .
  4. Install the right front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  5. Lower the vehicle.