Caution: Refer to Fastener Caution in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedure

1. Remove the fuse labeled HVAC CTRL (BATT).
2. Remove the air inlet assembly. Refer to Air Inlet Assembly Replacement.
3. Disconnect the recirculation actuator electrical connector.

1

Screw, Recirculation Housing (Qty: 4)

Tighten
1.5 N·m (14 lb in)

2

Housing, Recirculation

3

Screw, Recirculation Actuator (Qty: 3)

Tighten
1.5 N·m (13 lb in)

4

Actuator, Recirculation

Procedure