Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle.
2. Remove the 3 wheelhouse liner screws, then remove the 3 push pins and pull rearward on the front liner.
3. Disconnect the fog lamp bulb socket electrical connector.

1

Front Fog Lamp Assembly Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2 N·m (18 lb in)

2

Front Fog Lamp Assembly

Tip
Remove the lamp assembly from the fog lamp bracket.

3

Front Fog Lamp Bulb

Warning: Refer to Halogen Bulb Warning in the Preface section.

Tip
Turn the bulb socket counterclockwise and remove from the fog lamp assembly.

4

Adjuster Screw

Procedure

Remove the screw in order to separate the fog lamp from the fog lamp ring.