GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Solstice 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Intake Air Pressure and Temperature Sensor Replacement

Removal Procedure

    Object Number: 1826861 Size: SH
  1. Disconnect the engine wiring harness electrical connector (2) from the intake air pressure and temperature sensor.

    2. Object Number: 1829737 Size: SH
  2. Remove the intake air pressure and temperature sensor bolts.
  3. Remove the intake air pressure and temperature sensor.

Installation Procedure

    Object Number: 1829737 Size: SH
  1. Lubricate the intake air pressure and temperature sensor O-ring with clean engine oil.
  2. Install the intake air pressure and temperature sensor.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the intake air pressure and temperature sensor bolts and tighten to 9 N·m (80 lb in).

    4. Object Number: 1826861 Size: SH
  4. Connect the engine wiring harness electrical connector (2) to the intake air pressure and temperature sensor.