1

Front Fender Emblem

Tip

1. Clean the adhesive tape residue from the surface of the front fender and dry thoroughly before applying the new emblem.
2. Peel protective backing from emblem and ensure no foreign matter or dirt comes in contact with the adhesive backing prior to installation.
3. Install the emblem and apply pressure to ensure full adhesion is made to the front fender.

1

Front Fender Emblem Assembly

Tip
When removing protective liners from adhesive backed emblems, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.

Procedure

1. Use a J 25070 Heat Gun or equivalent to remove the old emblem. Clean all the adhesive residue from the fender, wipe the surface dry with a clean lint-free towel prior to installing new emblem.
2. Apply thumb pressure to the emblem to ensure full adhesion is made to the fender.