Fastener Tightening Specifications: Refer to Fastener Tightening Specifications.

Preliminary Procedure

Remove the front fascia. Refer to Front Bumper Fascia Replacement

1

Retainer Clips, Front Fascia Grille (Qty: 4)

2

Grille, Front Fascia

Tip
Using a flat bladed tool, pry the grille out of the fascia.

Preliminary Procedure

Remove the front fascia. Refer to Front Bumper Fascia Replacement

1

Front Fascia Grille Retainer Clips (Qty: 3)

2

Front Fascia Grille

Tip
Using a flat bladed tool, pry the grille out of the fascia.

1

Front Fascia Grille Plastic Rivets (Qty: 6)

2

Front Fascia Lower Grille

Tip
Remove the plastic rivets and push the upper edge of the grille rearward off the mounting tabs and pull the grille forward in order to remove.

1

Front Fascia Outer Grille Screw (Qty: 2)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Front Fascia Outer Grille

Tip
Move the inside of the grille outward in order to release the inner locking tab from the front bumper fascia.

Preliminary Procedure

Remove the front fascia. Refer to Front Bumper Fascia Replacement .

1

Left/Right Lower Radiator Grille Screw (Qty: 3)

Notice: Refer to Fastener Notice in the Preface section.

Tighten
2 N·m (18 lb in)

2

Left/Right Lower Radiator Grille