Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Open the hood.
2. Disconnect the washer hose at the driver side hinge pillar to air inlet grille panel.
3. Disconnect the washer hose retention clip.
4. Remove the left front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
5. Remove the washer hose from the washer pump spout.
6. Drain the washer solvent into a suitable container.
7. Disconnect the hose from the washer container.

1

Connection, Windshield Washer Pump Hose to Air Inlet Grille Panel Hose

2

Clip, Washer Hose Retention

3

Hose, Washer Solvent Container to Washer Pump

Tip
Ensure washer hose is re-routed properly to the washer solvent container and secured.

Preliminary Procedure

Remove the air inlet panel to access hoses. Refer to Air Inlet Grille Panel Replacement .

1

Windshield Washer Nozzle Hose Assembly

Tip
Remove the washer hose with the nozzles from the integral clips on the under side of the air inlet grille panel.

2

Air Inlet Grille Panel

Preliminary Procedure

Remove the air inlet panel to access hoses. Refer to Air Inlet Grille Panel Replacement .

1

Windshield Washer Nozzle Hose Assembly

Procedure
Remove the washer hose with the nozzles from the integral clips on the under side of the air inlet grille panel.

2

Air Inlet Grille Panel