System | DTCs Required to Set System Status to YES |
---|---|
Catalyst Monitor If an I/M System Status indicator did NOT update to YES during the Inspection/Maintenance (I/M) System Check , review each indicator and reference this table to determine each DTC associated with the I/M System Status Indicator. Each DTC listed below has specific conditions that must be met for the diagnostic to run. Included in these conditions are additional DTCs which, if set, will inhibit these DTCs from running. Reviewing and operating the vehicle within the Conditions for Running for each DTC listed below will allow the I/M System Status Indicators to transition to YES. | |
Catalyst | |
EVAP | |
Oxygen Sensor | DTC P0130, P0131, P0132, P0133, P2195, P2196, P2231, or P2297 |
Oxygen Sensor Heater |
System | DTCs Required to Set System Status to YES |
---|---|
Catalyst Monitor If an I/M System Status indicator did NOT update to YES during the Inspection/Maintenance (I/M) System Check , review each indicator and reference this table to determine each DTC associated with the I/M System Status Indicator. Each DTC listed below has specific conditions that must be met for the diagnostic to run. Included in these conditions are additional DTCs which, if set, will inhibit these DTCs from running. Reviewing and operating the vehicle within the Conditions for Running for each DTC listed below will allow the I/M System Status Indicators to transition to YES. | |
Catalyst | |
EVAP | |
Oxygen Sensor | DTC P0130, P0131, P0132, P0133, P2195, P2196, P2231, or P2297 |
Oxygen Sensor Heater |