GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2006 🢒 Pursuit 🢒 Body 🢒 Bumpers 🢒 Fascia, Fascia Energy Absorber, Impact Bar, Fascia Bracket Replacement - Rear

Fascia, Fascia Energy Absorber, Impact Bar, Fascia Bracket Replacement - Rear Chevrolet


Object Number: 1549994 Size: LF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Rear Bumper Fascia Replacement

Preliminary Procedures

  1. Remove the tail lamps and side marker lamps. Refer to Tail Lamp Assembly and /or Backup, Sidemarker, Stop, Turn Signal Bulb Replacement in Lighting Systems.
  2. Remove the license lamp. Refer to Rear License Lamp Replacement in Lighting Systems.
  3. Remove the rear wheel liners. Refer to Rear Wheelhouse Panel Liner Replacement in Body Rear End.

1

Retainer, Rear Bumper Fascia - Upper (Qty: 4)

2

Screw, Rear Bumper Fascia Tail Lamp Pocket (Qty: 4)

Tighten
2 N·m (18 lb in)

3

Bolt, Rear Bumper Fascia (Inside wheel well) (Qty: 2)

Tighten
10 N·m (89 lb in)

4

Retainer, Rear Bumper Fascia (Qty: 4)

5

Fascia, Rear Bumper

Tip
Pull the sides of the rear fascia at the quarter panel to release the fascia from the brackets.

Rear Bumper Fascia Energy Absorber Replacement

6

Absorber, Rear Bumper Fascia Energy Absorber

Tip
Release the absorber tabs to remove the energy absorber from the fascia.

Rear Bumper Impact Bar Replacement

7

Bolt, Rear Bumper Impact Bar (Qty: 8)

Tighten
30 N·m (22 lb ft)

8

Bar, Rear Bumper Impact

Rear Bumper Fascia Bracket Replacement

9

Nut, Rear Bumper Fascia Bracket - Center (Qty: 4)

Tighten
10 N·m (89 lb ft)

10

Bracket, Rear Bumper Fascia - Center

11

Bolt, Rear Bumper Fascia Bracket - Side (Qty: 4)

Tighten
10 N·m (89 lb ft)

12

Bracket, Rear Bumper Fascia Bracket - Side

13

Bolt, Rear Bumper Fascia Bracket - Upper (Qty: 4)

Tighten
10 N·m (89 lb ft)

14

Bracket, Rear Bumper Fascia Bracket - Upper

Fascia, Fascia Energy Absorber, Impact Bar, Fascia Bracket Replacement - Rear Pontiac


Object Number: 1549366 Size: LF

Callout

Component Name

Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Rear Bumper Fascia Replacement

Preliminary Procedures

  1. Remove the tail lamps. Refer to Tail Lamp Assembly and /or Backup, Sidemarker, Stop, Turn Signal Bulb Replacement in Lighting Systems.
  2. Remove the license lamp. Refer to Rear License Lamp Replacement in Lighting Systems.
  3. Remove the rear wheel liners. Refer to Rear Wheelhouse Panel Liner Replacement in Body Rear End.

1

Screw, Rear Bumper Fascia - Upper (Qty: 2)

Tighten
2 N·m (18 lb in)

2

Retainer, Rear Bumper Fascia - Upper (Qty: 4)

Tighten
2 N·m (18 lb in)

3

Bolt, Rear Bumper Fascia (Qty: 2)

Tip
Access the bolt from inside the wheel well.

Tighten
10 N·m (89 lb in)

4

Retainer, Rear Bumper Fascia - Lower (Qty: 4)

5

Fascia, Rear Bumper

Tip
Pull the sides of the rear fascia at the quarter panel to release the fascia from the brackets.

Rear Bumper Fascia Energy Absorber Replacement

6

Absorber, Rear Bumper Fascia Energy Absorber

Tip
Release the absorber tabs to remove the energy absorber from the fascia.

Rear Bumper Impact Bar Replacement

7

Bolt, Rear Bumper Impact Bar (Qty: 8)

Tighten
30 N·m (22 lb ft)

8

Bar, Rear Bumper Impact

Rear Bumper Fascia Bracket Replacement

9

Bolt, Rear Bumper Fascia Bracket - Side (Qty: 4)

Tighten
10 N·m (89 lb ft)

10

Bracket, Rear Bumper Fascia - Side

11

Nut, Rear Bumper Fascia Bracket - Center (Qty: 4)

Tighten
10 N·m (89 lb ft)

12

Bracket, Rear Bumper Fascia Bracket - Center