TRANSAXLE SPECIAL POLICY ADDITIONAL INFORMATION

PRIOR TO INSTALLATION OF THE RIGHT DRIVE AXLE SHAFT, THE FOLLOWING SHOULD BE PERFORMED:

A. CHECK THE AXLE BEARING JOURNAL (MICRO FINISH) FOR DAMAGE. USE CROCUS CLOTH TO POLISH THE JOURNAL IF NECESSARY.

B. USE EMERY CLOTH TO REMOVE ANY BURRS OR SHARP EDGES FROM DRIVE AXLE SPLINES. APPLY LUBE TO AXLE SPLINES AND SEAL. CAREFULLY INSTALL DRIVE AXLE IN TRANSMISSION. USE EXTREME CARE TO PREVENT AXLE SHAFT FROM DAMAGING THE SEAL DURING INSTALLATION.

General Motors bulletins are intended for use by professional technicians, not a "do-it-yourselfer". They are written to inform those technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions and know-how to do a job properly and safely. If a condition is described, do not assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See a General Motors dealer servicing your brand of General Motors vehicle for information on whether your vehicle may benefit from the information.