GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Montana SV6 Ext. 🢒 General Information 🢒 General Information 🢒 Stabilizer Shaft Insulator Replacement

Removal Procedure
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Move/turn the tires in order to access the stabilizer shaft insulator brackets.

    3. Object Number: 357447 Size: SH
  3. Remove the left and right side stabilizer shaft insulator bracket bolts.
  4. Remove the left and right side stabilizer shaft insulator brackets.

    5. Object Number: 174594 Size: SH
  5. Remove the left and right side stabilizer shaft insulators (1) from the stabilizer shaft (2).

Installation Procedure

    Object Number: 174594 Size: SH
  1. Install the left and right side stabilizer shaft insulators (1) to the stabilizer shaft (2).

    2. Object Number: 357447 Size: SH
  2. Install the left and right side stabilizer shaft insulator brackets.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the left and right side stabilizer shaft insulator bracket bolts and tighten to 48 N·m (35 lb ft) .
  4. Lower the vehicle.