For 1990-2009 cars only
Removal Procedure
- Extend the seat out from the vehicle.
- Remove the fasteners from the rear of the seat.
- Remove the screws from the roll-up chain cover.
- Remove the chain cover.
Installation Procedure
- Install the roll-up chain cover.
- Install the screws to the chain cover and tighten to 2 N·m (18 lb in) .
- Install the fasteners to the rear of the seat.
- Return the seat to the vehicle.
- Test the seat for proper operation.
Caution: Refer to Fastener Caution in the Preface section.
