Removal Procedure
- Open the liftgate.
- Remove screws (1) from liftgate striker (2).
- Remove liftgate striker and rear stowage compartment bracket (3) from the rear floor.
Installation Procedure
- Align the rear stowage compartment bracket (3), spacer, and liftgate striker (2) to the holes in body.
Caution: Refer to Fastener Caution in the Preface section.
- Install the liftgate striker retaining screws (1) and tighten in sequence to
25 N·m (18 lb ft)
.
- Close the liftgate.