For 1990-2009 cars only
Removal Procedure
- Disconnect the lower transmission oil cooler (TOC) line from the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
- Remove the cooling fans and shroud. Refer to Cooling Fan and Shroud Replacement .
- Remove radiator inlet hose. Refer to Radiator Inlet Hose Replacement .
- Remove the radiator outlet hose. Refer to Radiator Outlet Hose Replacement .
- Remove the bolt that secures the radiator to the condenser.
- Remove the condenser tube clip screw.
- Tilt the radiator and condenser inwards toward the engine and remove the radiator.
Installation Procedure
- Install the radiator.
- Install the condenser tube clip screw and tighten to 6 N·m (53 lb in) .
- Install the bolt that secures the radiator to the condenser and tighten to 2.5 N·m (22 lb in) .
- Install the radiator outlet hose. Refer to Radiator Outlet Hose Replacement .
- Install radiator inlet hose. Refer to Radiator Inlet Hose Replacement .
- Install the cooling fans and shroud. Refer to Cooling Fan and Shroud Replacement .
- Connect the lower transmission oil cooler (TOC) line to the radiator. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
- Refill the cooling system. Refer to Cooling System Draining and Filling .
- Inspect the transmission fluid level. Refer to Transmission Fluid Check .
Caution: Refer to Fastener Caution in the Preface section.
