Removal Procedure
- Disconnect the engine harness electrical connector (1) from the mass air flow (MAF)/intake air temperature
(IAT) sensor.
- Remove the air cleaner outlet duct . Refer to
Air Cleaner Outlet Duct Replacement
.
- Remove the MAF/IAT sensor (2) bolts.
- Remove the MAF/IAT sensor (2) from the air filter housing.
Installation Procedure
- Install the MAF/IAT sensor (2) to the air filter housing.
Caution: Refer to Fastener Caution in the Preface section.
- Install the MAF/IAT sensor (2) bolts and tighten to
10 Nยทm (89 lb in)
.
- Install the air cleaner outlet duct . Refer to
Air Cleaner Outlet Duct Replacement
.
- Connect the engine harness electrical connector (1) to the MAF/IAT sensor.
- Start and idle the engine.
- Inspect the air intake duct for leaks.