GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2009 🢒 Montana SV6 🢒 Steering 🢒 Steering Wheel and Column 🢒 Steering Column Wiring Harness Assembly Replacement

Removal Procedure

    Caution: The wheels of the vehicle must be straight ahead and the steering column in the LOCK position before disconnecting the steering column or intermediate shaft from the steering gear. Failure to do so will cause the SIR coil assembly to become uncentered, which may cause damage to the coil assembly.

  1. Remove the steering column. Refer to Steering Column Replacement.
  2. Disconnect all the electrical connectors.

    3. Object Number: 322946 Size: SH
  3. Remove all the wire harness straps (2).
  4. Remove the wire harness from the steering column.

Installation Procedure
  1. Install the wire harness to the steering column.

    2. Object Number: 322946 Size: SH
  2. Replace all the tie straps (2).
  3. Connect all the electrical connectors.
  4. Install the steering column. Refer to Steering Column Replacement.