GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Pontiac
🢒
2009
🢒
Montana SV6
🢒
Diagnostic Navigation
🢒
Vehicle Diagnostic Information
🢒 Defroster Valve Actuator Replacement
Removal Procedure
Remove the drive side knee bolster.
Locate the defrost actuator (1).
Disconnect the defrost actuator electrical connector (2).
Remove the defrost actuator bolts/screws (4).
Remove the defrost actuator (3).
Installation Procedure
Install the defrost actuator (3).
Caution:
Refer to
Fastener Caution
in the Preface section.
Install the defrost actuator bolts/screws (4) and tighten to
1.2 N·m (11 lb in)
.
Connect the defrost actuator electrical connector (2).
Install the driver side knee bolster.
Re-calibrate the actuators. Refer to
Actuator Recalibration
.