GM Service Manual Online
For 1990-2009 cars only
Makes
🢒
Pontiac
🢒
2009
🢒
Montana SV6
🢒
Engine
🢒
Engine Controls and Fuel - 3.9L
🢒 Engine Mount Strut Replacement - Right Side
Removal Procedure
Remove the intake manifold cover. Refer to
Intake Manifold Cover Replacement
.
Loosen and remove the engine mount strut to engine mount strut bracket through bolt (3) and nut (4).
Loosen and remove the engine mount strut to engine mount strut bracket through bolt (4) and nut (5).
Remove the engine mount strut (6).
Inspect the rubber in the engine mount strut for the following conditions:
•
Hardness
•
Splitting
•
Cracking
Installation Procedure
Install the engine mount strut (6).
Caution:
Refer to
Fastener Caution
in the Preface section.
Install and tighten the engine mount strut to engine mount strut bracket through bolt (4) and nut (5). Tighten the bolt/nut to
48 N·m (36 lb ft)
.
Install the intake manifold cover. Refer to
Intake Manifold Cover Replacement
.
Install and tighten the engine mount strut to engine mount strut bracket through bolt (3) and nut (4). Tighten the bolt/nut to
48 N·m (36 lb ft)
.