Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
DEFINITION: One of the heated seats is always on. | ||||
1 | Did you review the system operation and perform the necessary inspections? | -- | Go to Step 2 | Go to Symptoms - Seats |
2 | Verify the fault is present. Does the system operate normally? | -- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
3 |
Refer to Circuit Testing and Wiring Repairs Did you find and correct the condition? | Go to Step 6 | Go to Step 4 | |
4 |
Refer to Circuit Testing and Wiring Repairs Is there voltage on the Ignition 3 circuit? | Go to Step 5 | ||
5 | Inspect for poor connections at the harness connector of the heated seat switches in the Rear Window Wiper/Washer and Multifunction Switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems. If a poor connection is not found, replace the Rear Window Wiper/Washer and Multifunction Switch. Refer to Multifunction Switch Assembly Replacement - Instrument Panel in Lighting. Did you find and correct the condition? | Go to Step 6 | ||
6 | Operate the system in order to verify the repair. Did you correct the condition? | -- | System OK | Go to Step 3 |
