Tools Required

J 23653-SIR Lock Plate Compressor

1. Align the race and upper shaft assembly (1) to the 12 o'clock position.
2. Put the lock cylinder in the LOCK position and remove the key.



3. Install the inner race (5).
4. Install the upper bearing inner race seat (4).
5. Install the upper bearing spring (3).
6. Lubricate the turn signal cancel cam assembly (2) using grease kit GM Part Number 26001884.
7. Install the turn signal cancel cam assembly (2).
8. Install the shaft lock shield assembly (1).



9. Install the bearing retaining using J 23653-SIR .
10. Remove J 23653-SIR from the steering column.



11. Install the wave washer (1).
12. Install the inflatable restraint steering wheel module coil. Refer to Inflatable Restraint Steering Wheel Module Coil Assemble - Off Vehicle .