GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1617991  Size: SH
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.
  2. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle.
  3. Remove the siren electrical connector.
  4. Remove the siren bracket mounting bolt and siren.

Installation Procedure


    Object Number: 1617991  Size: SH
  1. Install the siren with the mounting bolt.
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Connect the electrical connector. Tighten the siren mounting bolt to 8 N·m (71 lb in).
  4. Lower the vehicle.
  5. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection.