GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Grand Prix 🢒 Body Hardware and Trim 🢒 Interior Trim and Paneling 🢒 Front Side Door Window Frame Rear Applique and Outer Weatherstrip Replacement

Removal Procedure

    Notice: To avoid paint damage, protect the area surrounding the part which you are removing or installing.

  1. Apply masking tape to the door frame and applique.
  2. Remove the front door trim panel. Refer to Front Side Door Trim Panel Replacement .
  3. Remove the window channel retainer. Refer to Front Side Door Window Channel Retainer Replacement .

    4. Object Number: 794036 Size: SH
  4. Remove the screws (1,2) from the upper and lower corners of the door frame.
  5. Pull the door window run channel weatherstrip down and reposition it in order to access to the applique rivets.

    6. Object Number: 800468 Size: SH
  6. Drill out the 4 mm (5/32 in) rivets along the inside edge of the door window channel retainer.

    7. Pull upward to release the applique from the door frame.

Installation Procedure

    Object Number: 800468 Size: SH
  1. Install the front door frame applique to the front door.
  2. Install the new 4 mm (5/32 in) rivets along the inside edge of the front door window channel retainer to secure the applique to the door frame.

    3. Object Number: 794036 Size: SH

    Notice: Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.

  3. Install the screws (1, 2) to the upper and lower corners of the door frame.

    4. Tighten
    Install the screws to 2 N·m (18 lb in).

  4. Install the window channel retainer. Refer to Front Side Door Window Channel Retainer Replacement .
  5. Install the window weatherstrip.
  6. Remove masking tape.
  7. Inspect the window for proper operation.
  8. Install the front water deflector, as necessary. Refer to Front Side Door Water Deflector Replacement .
  9. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement .