GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2007 🢒 Grand Prix 🢒 Diagnostic Navigation 🢒 Vehicle Diagnostic Information 🢒 Driver Information Center Replacement

Removal Procedure

    Object Number: 910510 Size: SH
  1. Use a plastic trim tool to remove the ignition switch bezel.

    2. Object Number: 928809 Size: SH
  2. Pull the instrument panel (I/P) accessory trim plate rearward.

    3. Object Number: 928828 Size: SH
  3. Disconnect the electrical connector from the driver information display assembly.

    4. Object Number: 1203190 Size: SH
  4. Remove the driver information display screws.
  5. Remove the driver information display.

Installation Procedure

    Object Number: 1203190 Size: SH
  1. Place the driver information display on the I/P accessory trim plate.

    2. Notice: Refer to Fastener Notice in the Preface section.

  2. Install the driver information display screws.

    3. Tighten
    Tighten the screws to 2 N·m (18 lb in).


    Object Number: 928828 Size: SH
  3. Connect the electrical connector to the driver information display.

    4. Object Number: 928809 Size: SH
  4. Press the I/P accessory trim plate to the I/P.

    5. Object Number: 910510 Size: SH
  5. Install the ignition switch bezel.