Notice: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.
2.1. | Install the 3 M8-1.25 x 100 mm bolts into the camshaft front bolt holes. |
2.2. | Using the bolts as a handle, carefully rotate and pull the camshaft out of the engine block. |
2.3. | Remove the bolts from the front of the camshaft. |
Notice: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.
2.1. | Install the camshaft sprocket bolt into the camshaft front bolt hole. |
2.2. | Using the bolt as a handle, carefully rotate and pull the camshaft out of the engine block. |
2.3. | Remove the bolt from the front of the camshaft. |