Removal Procedure
Caution: Refer to SIR Caution in the Preface section.
- Disable the SIR System. Refer to
SIR Disabling and Enabling
in SIR.
- Remove the steering wheel inflatable restraint module. Refer to
Inflatable Restraint Steering Wheel Module Replacement
in SIR.
- Remove the bolts (1) from the steering
wheel cover and lift the steering wheel cover from the steering wheel.
- Remove the steering wheel radio controls (2) from the steering
wheel cover.
- Disconnect the electrical connectors from the radio control switches.
- Remove the screws (1) from the A/T
tap shift switches, if equipped.
- Disconnect the electrical connectors.
- Remove the tap shift switches (2).
Installation procedure
- Install the A/T tap shift switches (2).
- Connect the electrical connectors.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws (1) to the tap shift switches.
Tighten
Tighten the screws to 3.5 N·m (31 lb in).
- Connect the electrical connectors to the
radio control switches.
- Install the steering wheel radio controls (2) to the steering wheel
cover.
- Position the steering wheel cover to the steering wheel. Install the bolts (1)
to the steering wheel cover.
Tighten
Tighten the bolts to 3.5 N·m (31 lb in).
- Install the steering wheel inflatable restraint module. Refer to
Inflatable Restraint Steering Wheel Module Replacement
in SIR.
- Enable the SIR System. Refer to
SIR Disabling and Enabling
in SIR.