Notice: Refer to Fastener Notice in the Preface section.

Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front fascia extension.
3. Disconnect the electrical connector for the front park and turn signal lamp.

1

Front Park and Turn Signal Lamp Screws (Qty: 4)

Tighten
2 N·m (18 lb in)

2

Front Park and Turn Signal Lamp Housing

3

Front Park and Turn Signal Lamp Socket

Tip
Rotate the lamp socket counterclockwise in order to remove.