GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 1608092  Size: SH
  1. Lower the rear of the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.
  2. Reposition the antenna cable mastic patches for access, if required.
  3. Disconnect the antenna cable from the antenna base cable connector.
  4. Remove the antenna base bolt.
  5. Remove the antenna.

Installation Procedure


    Object Number: 1608092  Size: SH
  1. Route the antenna base cables through the roof opening.
  2. Install the antenna base to the roof.
  3. Notice: Refer to Fastener Notice in the Preface section.

  4. Secure the antenna base with the bolt.
  5. Tighten
    Tighten the antenna base bolt to 3 N·m (27 lb in).

  6. Connect the antenna cable to the antenna base cable connector.
  7. Install the antenna cable mastic patches.
  8. Install the headliner. Refer to Headlining Trim Panel Replacement in Interior Trim.