GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 910510  Size: SH
  1. Use a plastic trim tool to remove the ignition switch bezel.

  2. Object Number: 928559  Size: SH
  3. Remove the instrument panel (I/P) accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages and Console.
  4. Apply the park brake.
  5. Shift the transaxle to 1.
  6. Remove the I/P center compartment screws.
  7. Remove the I/P center compartment.

Installation Procedure


    Object Number: 929176  Size: SH
  1. Align the I/P center compartment locator to the opening in the vehicle location antenna module bracket.

  2. Object Number: 928559  Size: SH
  3. Install the I/P center compartment to the I/P.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the I/P center compartment screws.
  6. Tighten
    Tighten the screws to 2 N·m (18 lb in).

  7. Shift the transaxle to P.
  8. Press to release the park brake.
  9. Install the I/P accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement in Instrument Panel, Gages and Console.

  10. Object Number: 910510  Size: SH
  11. Install the ignition switch bezel.