Removal Procedure
- Remove the rear shelf trim panel. Refer
to
Rear Window Shelf Trim Panel Replacement
in
Interior Trim.
- Reposition the sound barrier for access.
- Use a small wide-bladed plastic tool to release the adhesive. Remove the
navigation antenna (2) from the rear shelf.
- Disconnect the navigation antenna cable connector.
- Clean the adhesive residue from the rear shelf using a razor blade, an
isopropyl alcohol pad, and a clean lint-free cloth.
Installation Procedure
- Clean the surface of the rear shelf in the
navigation antenna mounting location, using an isopropyl alcohol pad and a clean lint-free
cloth.
Important: Do not touch the adhesive backing.
- Remove the protective backing from the adhesive of the navigation antenna.
- Install the navigation antenna (2) to the rear shelf surface.
Press the navigation antenna into place for approximately 30 seconds
until fully seated.
- Connect the navigation antenna cable connector.
- Install the sound barrier.
- Install the rear shelf trim panel. Refer to
Rear Window Shelf Trim Panel Replacement
in Interior Trim.