Removal Procedure
- Open the instrument panel (I/P) compartment.
- Remove the I/P compartment door latch striker screws.
- Remove the I/P compartment door latch striker.
Installation Procedure
Notice: Refer to Fastener Notice in the Preface section.
- Install the I/P compartment door latch striker and screws.
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Close the I/P compartment.
- Inspect the I/P compartment door for the proper alignment. Adjust the I/P compartment door latch striker as necessary.