Removal Procedure
- Remove the I/P compartment latch. Refer to
Instrument Panel Compartment Door Latch Replacement
.
- Insert the key into the I/P compartment
door lock cylinder. Rotate the key clockwise.
- Insert a small diameter tool into the slot on the upper side of the door
handle cylinder housing. Depress and hold the lock cylinder retainer while rotating
the key further clockwise to the stop.
- Pull
to remove the lock cylinder.
Installation Procedure
- Insert the key into the lock cylinder.
- Align
the lock cylinder in the same position used for removal. Push the cylinder in place
to seat fully.
- Turn the key counterclockwise to secure the lock cylinder retainer.
- Remove the key from the lock cylinder.
- Inspect the operation of the lock cylinder. The lock cylinder should only
allow a ¼ turn and should be securely retained in the door handle.
- Install the I/P compartment latch. Refer to
Instrument Panel Compartment Door Latch Replacement
.