Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .

1

Front Fender Nameplate

Tip

1. When removing protective liners from adhesive backed emblem, be careful not to touch the tape with hands and do not allow the tape to come in contact with dirt or any foreign matter prior to adhesion.
2. Use a J 25070 or equivalent to remove the old emblem. Clean all the adhesive residue from the fender, wipe the surface dry with a clean lint-free towel prior to installing new emblem.
3. Apply thumb pressure to the emblem to ensure full adhesion is made to the fender.