Removal Procedure
- Remove the mirror face. Refer to
Outside Rearview Mirror Glass Replacement
.
- Remove the screws from the mirror motor.
- Disconnect the electrical connectors from the rear of the mirror motor.
Note the position
of the plugs on the mirror motor when removing.
- Remove the motor .
Installation Procedure
- Position the motor to the mirror housing.
- Connect the electrical connector to the rear of the mirror motor.
Notice: Refer to Fastener Notice in the Preface section.
- Install the screws to the mirror motor.
Tighten
Tighten the screws to 2 N·m (18 lb in).
- Install the mirror face to the mirror housing. Refer to
Outside Rearview Mirror Glass Replacement
.
- Inspect the mirror for proper operation.