Removal Procedure
- Remove the headliner. Refer to
Headlining Trim Panel Replacement.
- Remove the nylon tie straps located from both ends of the sunroof control module (2).
- Release the control module retainers from the metal bracket by sliding the control module toward the left side of the vehicle.
- Remove the control module from the sunroof module.
- Disconnect the electrical connectors from the control module.
- Remove the control module from the vehicle.
Installation Procedure
- Position the control module to the sunroof module.
- Connect the electrical connectors to the ends of the control module.
- Install the control module to the sunroof module by sliding it to the right to engage the retainers.
- Install the nylon tie straps at both ends of the control module (2).
- Inspect the operation of the sunroof module.
- Install the headliner. Refer to
Headlining Trim Panel Replacement.
- Refer to
Control Module References for programming and setup information.