GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2005 🢒 Grand Prix 🢒 Vehicle Control Systems 🢒 Vehicle DTC Information 🢒 Battery Current Sensor Replacement

Battery Current Sensor Replacement L26/L32

Removal Procedure

    Object Number: 1552765 Size: SH
  1. Disconnect the instrument panel (I/P) harness electrical connector (2) from the battery current sensor (1).
  2. Remove the negative battery cable. Refer to Battery Negative Cable Replacement .

    3. Object Number: 2065396 Size: SH
  3. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
  4. Squeeze the negative battery cable branches together.

    5. Important: Note the position of the battery current sensor prior to removal.

  5. Slide the battery current sensor (1) off of the negative battery cable.

Installation Procedure

    Object Number: 2065396 Size: SH

    Important: Ensure that the tape tab is pointing away from the battery prior to installation.

  1. Slide the NEW battery current sensor (1) up onto the negative battery cable.
  2. Using NEW tie straps and electrical tape, attach the battery current sensor to the negative battery cable.

    3. Object Number: 1552765 Size: SH
  3. Install the negative battery cable. Refer to Battery Negative Cable Replacement .
  4. Connect the I/P harness electrical connector (2) to the battery current sensor (1).

Battery Current Sensor Replacement LS4

Removal Procedure

    Object Number: 1552766 Size: SH
  1. Disconnect the instrument panel (I/P) harness electrical connector (5) from the battery current sensor (6).
  2. Remove the negative battery cable. Refer to Battery Negative Cable Replacement .

    3. Object Number: 1475086 Size: SH
  3. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
  4. Squeeze the negative battery cable branches together.

    5. Important: Note the position of the battery current sensor prior to removal.

  5. Slide the battery current sensor (1) off of the negative battery cable.

Installation Procedure

    Object Number: 1475086 Size: SH

    Important: Ensure that the tape tab is pointing away from the battery prior to installation.

  1. Slide the NEW battery current sensor (1) up onto the negative battery cable.
  2. Using NEW tie straps and electrical tape, attach the battery current sensor to the negative battery cable.

    3. Object Number: 1552766 Size: SH
  3. Install the negative battery cable. Refer to Battery Negative Cable Replacement .
  4. Connect the I/P harness electrical connector (5) to the battery current sensor (6).