Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine Running | |||
Battery Voltage | Data | Volts | 12.6 Volts |
Regulated Voltage Control Current Sensor | Data | Percent | 40 Percent |
Starter Switch | Inputs | Cranking/Released | Cranking |
Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
Ignition ON/Engine OFF/Transmission in Park | |||
GEN F-Terminal Signal | ECM/PCM Data List | Percent | 20 Percent |
GEN L-Terminal Signal Command | ECM/PCM Data Display | On/Off | Off |
Ignition 1 Signal | ECM/PCM Data Display | Volts | 12.6 Volts |
IMS | Transmission Data | Park, Park/Reverse, Reverse, Reverse/Neutral, Neutral, Neutral/Drive 4, Drive 4, Drive 4/Drive 3, Drive 3, Drive 3/Drive 2, Drive 2, Drive 2/Drive 1, Drive 1, INVALID, OPEN | Park |
Starter Relay Circuit History | PCM Data Display | Open, Short, Invalid, OK | OK |
Starter Relay Circuit Status | ECM Data Display | Incomplete, Short Gnd / Open, Short to B+, OK | OK |
Starter Relay Command | ECM/PCM Data Display | On/Off | Off |
