GM Service Manual Online
For 1990-2009 cars only
Makes 🢒 Pontiac 🢒 2004 🢒 Grand Prix 🢒 General Information 🢒 General Information 🢒 Power Steering Cooler Pipe/Hose Replacement

Power Steering Cooler Pipe/Hose Replacement L26, L32

Removal Procedure
  1. Remove the drive belt. Refer to Drive Belt Replacement .
  2. Place a drain pans under the vehicle as needed.
  3. Remove the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .

    4. Object Number: 294335 Size: SH
  4. Remove the power steering cooler hose from the steering gear.

    5. Object Number: 284303 Size: SH
  5. Remove the power steering cooler hose from the power steering pump.
  6. Unclip the power steering cooler hose from any front frame retainers as needed.
  7. Remove the power steering cooler hose from the vehicle.

Installation Procedure
  1. Position the power steering cooler hose to the vehicle.
  2. Clip the power steering cooler hose to any front frame retainers as needed.

    3. Object Number: 284303 Size: SH
  3. Install the power steering cooler hose to the power steering pump.

    4. Notice: Refer to Fastener Notice in the Preface section.


    Object Number: 294335 Size: SH
  4. Install the power steering cooler hose to the steering gear.

    5. Tighten
    Tighten the fitting to 27 N·m (20 lb ft).

  5. Clean any excess fluid from the vehicle and remove the drain pans.
  6. Install the right front tire and wheel assembly. Refer to Tire and Wheel Removal and Installation .
  7. Install the drive belt. Refer to Drive Belt Replacement .
  8. Fill and bleed the power steering system. Refer to Power Steering System Bleeding .