GM Service Manual Online
For 1990-2009 cars only

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.

  2. Object Number: 1208422  Size: SH
  3. Remove the left and right side stabilizer shaft insulator clamp bolts.
  4. Remove the left and right side stabilizer shaft insulator clamp.

  5. Object Number: 1208424  Size: SH
  6. Remove the left and right side stabilizer shaft insulators (1) from the stabilizer shaft (2).

Installation Procedure


    Object Number: 1208424  Size: SH
  1. Install the left and right side stabilizer shaft insulators (1) to the stabilizer shaft (2).

  2. Object Number: 1208422  Size: SH
  3. Install the left and right side stabilizer shaft insulator clamps.
  4. Notice: Refer to Fastener Notice in the Preface section.

  5. Install the left and right side stabilizer shaft insulator clamp bolts.
  6. Tighten
    Tighten the bolts to 30 N·m (22 lb in).

  7. Lower the vehicle.