GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 179498  Size: SH
  1. Remove the coolant heater cord retainer from the upper radiator support.
  2. Cut the coolant heater cord straps at the engine wiring harness.
  3. Disconnect the coolant heater cord from the coolant heater.
  4. Remove the coolant heater cord from the vehicle.

Installation Procedure


    Object Number: 179498  Size: SH

    Notice: The heater cord must not touch the engine, hot pipes, manifold, or any moving parts. Route the cord to the left front of the engine compartment securing with tie straps as necessary to prevent damage.

  1. Install the coolant heater cord to the vehicle.
  2. Connect the coolant heater cord to the coolant heater.
  3. Install a new coolant heater cord straps at the engine wiring harness.
  4. Install the coolant heater cord retainer to the upper radiator support.