The front fog lamps must be aimed for proper illumination
of the road. The front fog lamp aim should be checked when a new front fog
lamp assembly is installed, or if service or repairs in the front end area
may have disturbed the front fog lamp mounting.
There is no horizontal adjustment for aiming the front fog lamp assemblies
on this vehicle.
- To ensure accurate vertical front fog lamp aiming, first perform
the following steps to prepare the vehicle.
| • | Ensure that all the components are in place on the vehicle, if
other service has been performed on the vehicle. |
| • | Ensure the fuel level is full. |
| • | Place the vehicle on a level surface 1.52 m (5 ft)
away from a target screen. |
| • | Stop all other operations of work on the vehicle. |
| • | Jounce the vehicle to settle the suspension. |
| • | Cover the headlamps while aiming the fog lamps. |
- Turn the front fog lamps ON.
- Adjust the fog lamp up
or down until the top edge of the high intensity zone on the screen is 102 mm
(4 in) below the horizontal centerline (2), within the range of
0 mm (0 in) (3) to 203 mm (8 in) (5), below
the horizontal centerline, on the target screen.
- Turn OFF the front fog lamps.
