Removal Procedure
- Open the door.
- Beginning at one end, slowly pull the self-adhesive door sill
plate from the rocker.
- Completely pull the door sill plate from the rocker.
Installation Procedure
- Clean the surface of the
rocker where the door sill plate contacts using oil-free naptha or alcohol,
wiping the surface of the rocker dry with a clean, lint-free cloth.
- Remove the protective
liner from the back side of the new door sill plate.
- Align the forward notch
on the door sill plate with the raised section on the rocker.
- Install the door sill
plate to the rocker.
- Use a hand roller in order to ensure that the door sill plate
is properly attached to the rocker.
- Close the door.