GM Service Manual Online
For 1990-2009 cars only

Removal Procedure


    Object Number: 656125  Size: SH
  1. Open the rear door.
  2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  3. Remove the trim panel energy absorber.
  4. Remove the warning reflector from the rear door trim panel using a small flat-bladed tool, pressing on the tabs located on the front and rear of the reflector.

Installation Procedure


    Object Number: 656125  Size: SH
  1. Press the warning reflector back into the rear door trim panel until fully seated.
  2. Install the trim panel energy absorber.
  3. Install the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement .
  4. Close the rear door.