Removal Procedure
- Open the front door.
- Remove the front door trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- If equipped, disconnect the electrical connector (1) to the warning reflector light.
- Remove the warning reflector (3) from the front door trim panel using a small, flat-bladed tool, pressing on the tabs on the ends of the warning reflector.
Installation Procedure
- Connect the electrical connector (1) to the warning reflector light.
- Press the warning reflector (3) back into the front door trim panel until fully seated.
- Install the front door trim panel. Refer to
Front Side Door Trim Panel Replacement
.
- Close the front door.